IS-800CA Mid Frequency Inverter Weld Control

IS-800CA Mid Frequency Inverter Weld Control

Formerly known as IS-800CR

The IS-800CA mid-frequency inverter resistance weld control features closed-loop current, voltage, and power feedback, fast response times, and max output of 40kA making it ideal for small or large, single or mixed part manufacturing.

Built in the USA and packaged in a NEMA enclosure, the IS-800CA comes standard with a rotary handle and internal circuit breaker. It has a “triple pulse” weld capability which provides flexible weld profiles allowing for three pulses in each cycle. Each weld segment can be programmed with upslope and downslope and may contain up to 19 pulses.

Users can also change the control mode for each weld segment. The fully-featured model boasts advanced force and displacement features unique to the unit including initial part thickness check, weld to displacement, and the ability to set final displacement limits.

800 amp primary output

Six feedback modes

Built-in current, voltage, power, time and pulse monitor

Optional displacement monitoring and proportional regulator control

Primary short circuit protection

Triple pulse weld profile: W1, W2, W3, up to 19 pulsations per weld segment

Pre-weld check process tool

I/O check screen

Cascade option: 5 and 7 way cascade

RS232 or RS485 communications

NEMA style enclosure

Factory automation with ethernet IP

Technical Specifications